I le avea ai ma ta'ita'i e tu'uina atu mea alumini fa'apitoa masa'o CNC auaunaga masini, Shanghai Miandi Metal Products Co., Ltd. fa'apitoa i le tu'uina atu o alumini alumini maualuga e fa'amalieina mo le viliina o le CNC, liliu, ma le gaosiga. Pe e te manaʻomia ni vaega mama faʻatasi ma geometries lavelave poʻo vaega maualuga-malosi mo pisinisi faigata, o lo matou tomai i le filifilia o mea faʻapipiʻi ma masini faʻamautinoa e le mafaatusalia le saʻo ma le faʻamaoni.

1. Alumini Alu'a'i Ki'i mo CNC Machining

O le masini CNC e manaʻomia ai mea e faʻapaleni ai masini, faʻamautu tulaga, faʻamaeʻaina, ma mea faʻainisinia. Lalo o faʻasologa alumini sili ona faʻaaogaina ma o latou tulaga tulaga ese:

a. 6000 Fa'asologa Alumini (6061, 6063)

Fuafuaga Autu: Silicon (Si) ma le magnesium (Mg) e avea ma elemene faʻafefiloi muamua (faʻataʻitaʻiga, 6061: 0.6% Si, 1.0% Mg).

Machinability: Fausiaina sili ona lelei ma le maualalo o le tipiina o malosiaga, lelei mo faʻagaioiga CNC maualuga. Smooth surface finish (Ra ≤ 1.6μm) e mafai ona ausia e aunoa ma le tele o le faʻaogaina o le post-processing.

Meatotino Faʻainisinia: Malosi faʻapitoa (UTS: 260-310 MPa i le T6 temper), lelei le faʻafefeteina, ma le faʻafefe. E mafai ona togafitia le vevela (T4 / T6 tempering) mo le faʻaleleia atili o le maʻaʻa ma le faʻamaoni faʻavae.

Fa'aoga masani: Fa'aola va'alele, vaega ta'avale, vaega fa'apipi'i, ma fa'aulu alumini.

Aisea e Filifilia ai Matou: Matou te ofoina atu 6061-T6 / T651 aluminium plates / rods faʻatasi ai ma tolerances faʻamaufaʻailoga (± 0.01 mm), sauni mo le maualuga o le CNC milling.

e. 7000 Fa'asologa Alumini (7075)

Tulaga Autu: Zinc (Zn) e fai ma fa'amalosi muamua, ma Mg ma Cu (fa'ata'ita'iga, 7075: 5.6% Zn, 2.5% Mg).

Machinability: Maaa maualuga atu nai lo 6000 faasologa e manaʻomia carbide poʻo PCD meafaigaluega, ae ofo atu sili tipitipi saʻo mo shapes.Excellent tetee atu i deformation i le taimi o masini mamafa.

Mechanical Properties: Ultra-maualuga malosi (UTS: e oʻo atu i le 572 MPa i le T651 temper), faʻamalosia ai le malosi nai lo le tele o uʻamea aʻo tumau pea le mama.

Fa'aoga masani: Vaega fa'atulagaina o va'alele (fa'ata'ita'iga, vaega o apa'au), ta'avale ta'avale afi, ma fa'ama'i sa'o.

O La Tatou Fa'amanuiaga: Fa'ato'aga 7075-T651 alumini u'amea/papatusi fa'atasi ma le fa'amama fa'amama avega, fa'aitiitia le fa'aosoina o masini.

i. 2000 Fa'asologa Alumini (2024)

Vaega Autu: Kopa (Cu)-faʻavae ma Mg/Mn (faʻataʻitaʻiga, 2024: 4.4% Cu, 1.5% Mg).

Machinability:Machinability lelei (aemaise lava i setete annealed) mo CNC liliu ma vili, e ui lava ita faigata (T8) manaʻomia meafaigaluega malosi.Capable e ausia tolerances mau mo vaega aerospace-grade.

Meatotino Faʻainisinia: Malosi maualuga (UTS: 470–485 MPa i le T351 ita) ma sili atu le vaivai teteʻe. vevela-togafitiga mo optimized maaa i talosaga-ave avega.

Fa'aoga masani: Va'alele apa'au spars, tu'ueleele vaega o mea fa'aoga, ma mea fa'ainisinia maualuga.

o. 5000 Fa'asologa Alumini (5052, 5083)

Tulaga Autu: Magnesium (Mg)-mauoa (faataitaiga, 5052: 2.5% Mg).

Masini: vaivai ma ductile, lelei moCNC faia ma punou e aunoa mata'e.Mae'e luga luga mo mea teuteu pe corrosion-maaleale vaega.

Meatotino Faʻainisinia: Malosi faʻapitoa ma faʻalavelave faʻaleagaina (lelei mo le gataifale poʻo siosiomaga fafo).

Fa'aoga masani: Va'a va'a, mea tau vaila'au, ma mea teuteu e fa'aogaina e le CNC.

O la matou ofo: 2024-T351 ipu alumini faʻamaonia mo tulaga faʻa-aerospace (faʻataʻitaʻiga, AMS 4042).

2. CNC Machining Lelei o Aluminum Alloys

a. Meatotino Meatotino Fa'atonuina mo le Sa'o

Low Density: 2.7 g/cm³ (1/3 le mamafa o le uamea), faʻaitiitia le inertia mo le faʻavaveina o masini ma mea mama mama.

Fa'avevela vevela: O le fa'amalo maualuga o le vevela e fa'aitiitia ai le ofuina o meafaigaluega ma le fa'aleagaina o le vevela i le taimi o le tipi saosaoa.

Amioga Isotropic: Fa'ameamea fa'ainisinia tutusa i itu uma, fa'amautinoaina o taunu'uga machining faifaipea.

e. Lelei Fa'amesini & Fa'atauga

Vaʻavaʻavaʻa Maualuga: Alumini e faʻatagaina fua fafaga e oʻo atu i le 5000 mm / min (faʻalagolago i le uʻamea), faʻaitiitia taimi taamilosaga.

Meafaigaluega Fesoʻotaʻi: Faʻatasi ma carbide, HSS, ma mea faigaluega PCD, e ofoina atu le fetuutuunai mo le gaogao ma le faʻamaeʻaina o gaioiga.

Pulea Chip: O meataalo e pei o le 6061 e maua ai tupe meataalo faifai pea, a'o togi e fai fua (fa'ata'ita'iga, 6061 fa'atasi ai ma le Pb/Bi fa'aopoopo) e maua ai tupe meataalo mo le masini fa'aautomatika.

i. Fetuuna'i Fa'agasologa Fa'auma

Fa'ai'uga o le Lau'ele'ele: Anodizing, fa'apipi'i pa'u, fa'aeletise, po'o le fa'afefeteina o lopa e fa'aleleia atili ai le fa'alelei ma le fa'a'ele'ele.

Togafitiga o le Vevela: Fa'aleaganu'u masani (fa'ata'ita'iga, T6) e ausia ai le ma'a'a fa'atatau ma le fa'amama avega pe a uma le masini.

3. Shanghai Miandi's CNC Machining Solutions mo Aluminium

Fa'aaoga a matou agava'a fa'ai'uga e fa'aliliu ai alumini alumini i vaega sa'o:

a. Sapalai Mea

Fa'asologa atoa o alumini alumini: 6061, 7075, 2024, 5052 i totonu o papatusi, la'au, paipa, ma fa'auluuluga masani, e maua mai fale gaosi fa'amaonia.

Filifiliga o le Ita: Fa'apipi'i (O), fofo-togafitiga (T4), matua (T6), ma fa'amama avega (T651) e fa'amalieina ai masini ma fa'atinoga mana'oga.

e. Au'aunaga sa'o CNC

Malosiaga o masini:

3/4/5-axis CNC milling mo geometries lavelave (faataitaiga, aerospace brackets, masini faafomai).

O le fa'aliliuina o le CNC mo 'au, 'au, ma vaega fa'ata'oto (fa'apalepale: ±0.005 mm).

Suiselani masini mo vaega micro-saʻo (diamita: 0.5-20 mm).

Ausilali faʻagasologa: viliina, tapping, threading, broaching, ma EDM mo foliga lavelave.

i. Fa'amautinoaga Tulaga

ISO 9001: 2015 Faʻamaonia: Suʻesuʻega malosi o mea kemisi, mea faʻainisinia, ma le saʻo saʻo (CMM / fua faʻatatau).

Lagolago DFM: Fa'atalanoaga fua-mo-machining e fa'amalieina vaega geometry mo le tau ma le lelei.

o. Customization & Scalability

Fa'ata'ita'iga fa'ata'ita'i la'ititi i le gaosiga maualuga, fa'atasi ai ma le vave fa'aliliuina (7-10 aso mo fa'ata'ita'iga).

Fa'atautaiga o alamanuia: Meafaitino ua fa'amaonia ile ASTM, AMS, GB, po'o le ISO, fa'atasi ai ma fa'amaumauga e mafai ona su'esu'eina mo tagata va'alele ma ta'avale.

4. Aisea Filifilia Aluminum mo CNC Machining?

Paleni Malosi-Mamafa: Lelei mo faʻaoga e manaʻomia ai le mamanu mama (faʻataʻitaʻiga, aerospace, drones).

Tau-Tagata: E maualalo le tau o meafaitino ma masini nai lo le titanium poʻo le sila, faʻatasi ai ma le toe faʻaaogaina lelei.

Fuafuaga Saolotoga: Fa'ailoga lavelave, puipui manifinifi, ma fa'apalepale fufusi e mafai ona maua i masini fa'aonaponei CNC.

Fa'afeso'ota'i Shanghai Miandi Aso nei mo le fa'atulagainaCNC machining fofo e faʻaaoga ai alumini alumini faʻapitoa. Pe e te manaʻomia se faʻataʻitaʻiga se tasi poʻo vaega faʻapipiʻi tele, o lo matou tomai i le filifilia o uʻamea, saʻo masini, ma le pulea lelei e mautinoa ai le manuia o lau poloketi.

Shanghai Miandi Metal Products Co., Ltd. – Sa'o i Tioti uma.