6063 Aluminum Dìoy zagaye mashaya
6063 sandunan Aluman al-MG-Si jerin manyan filastik na yau da kullun, tare da ingantattun halaye na inji, kuma suna da saukin kamuwa ga diforation na oxidididation.
Ana amfani da alloy don nau'ikan tsarin gine-gine, daskararru na al'ada da matatun zafi. Saboda aikinta, ana iya amfani dashi don aikace-aikacen lantarki na T5, T52 da T6 harbe-harben.
| Abubuwan sunadarai WT (%) | |||||||||
| Silicon | Baƙin ƙarfe | Jan ƙarfe | Magnesium | Manganese | Chromium | Tutiya | Titanium | Wasu | Goron ruwa |
| 0.2 ~ 0.6 | 0.35 | 0.1 | 0.45 ~ 0.9 | 0.1 | 0.1 | 0.1 | 0.15 | 0.15 | Ragowa |
| Kayan aikin kayan aikin yau da kullun | ||||
| Fushi | Diamita (mm) | Da tenerile (MPA) | Yawan amfanin ƙasa (MPA) | Elongation (%) |
| T4 | ≤150.00 | ≥130 | ≥65 | ≥14 |
| > 150.00 ~ 200.00 | ≥120 | ≥65 | ≥12 | |
| T5 | ≤200.00 | ≥175 | ≥130 | ≥8 |
| T6 | ≤150.00 | ≥215 | ≥170 | ≥10 |
| > 150.00 ~ 200.00 | ≥195 | ≥160 | ≥10 | |
Aikace-aikace
Tsarin Fuseelage
Motocin motoci
Injiniya na inji
Amfaninmu
Kaya da isarwa
Muna da isasshen samfuri a hannun jari, zamu iya ba da isasshen kayan aiki. Lokacin jagoranci na iya zama a cikin kwanaki 7 don ƙirar hannun jari.
Inganci
Duk samfuran sun fito ne daga babban masana'antu, zamu iya bayar da MTC zuwa gare ku. Kuma muna iya bayar da rahoton gwajin ɓangare na uku.
Al'ada
Muna da injin yankan, ana samun girman al'ada.
