Good Quality Aluminum Plate 20mm - Aluminum Round Bar 7075 T6 T651 High Corrosion Resistant – Miandi
Good Quality Aluminum Plate 20mm - Aluminum Round Bar 7075 T6 T651 High Corrosion Resistant – Miandi Detail:
7075 AEROSPACE ALUMINUM BAR
7075 is an aerospace aluminum bar with cold finished or extruded aluminum wrought alloy with high strength, adequate machinability and improved stress corrosion control. Fine grain control results in good tool wear.
7075 is one of the highest strength aluminum alloys. It has good fatigue strength and average machinability. Often used where parts are highly stressed. It is not weld able and has less corrosion resistance than other aluminum alloys. The mechanical properties depend on the temper of the material. Commonly used in the bicycle industry, aircraft structures.
When forging this metal, it is recommended that the temperature be set between 700 and 900 degrees. This should then be followed by solution heat treatment. It’s not recommended for welding to be used as a joining technique, but if needed, resistance welding can be used. It’s not recommended for arc welding to be used because it can lower the metal’s corrosion resistance.
Chemical Composition WT(%) |
|||||||||
Silicon |
Iron |
Copper |
Magnesium |
Manganese |
Chromium |
Zinc |
Titanium |
Others |
Aluminum |
0.40 |
0.50 |
1.20~2.0 |
2.10~2.90 |
0.30 |
0.18~0.28 |
5.10~6.10 |
0.20 |
0.15 |
Balance |
Typical Mechanical Properties |
|||||
Temper |
Diameter (mm) |
Tensile Strength (Mpa) |
Yield Strength (Mpa) |
Elongation (%) |
Hardnedd (HB) |
T6,T651,T6511 | ≤25.00 |
≥540 |
≥480 |
≥7 |
150 |
>25.00~100.00 |
560 |
500 |
7 |
150 | |
>100.00~150.00 |
550 |
440 |
5 |
150 | |
>150.00~200.00 |
440 |
400 |
5 |
150 | |
T73,T7351,T73511 | ≤25.00 |
485 |
420 |
7 |
135 |
>25.00~75.00 |
475 |
405 |
7 |
135 | |
>75.00~100.00 |
470 |
390 |
6 |
135 | |
>100.00~150.00 |
440 |
360 |
6 |
135 |
Applications
Aircraft Structures
Bicycle Industry
Our Advantage
Inventory and Delivery
We have enough product in stock, we can offer enough material to customers. The lead time can be within 7 days for stock materil.
Quality
All the product are from the biggest manufacturer, we can offer the MTC to you. And we can also offer Third-Party test report.
Custom
We have cutting machine, custom size are available.
Product detail pictures:
Related Product Guide:
Form 13F-HR FIFTH THIRD BANCORP For: Mar 31 | Aluminum 5086
Flat-pack Great Lakes cabin is designed to weather the coldest of winters | 4043 Aluminum Plate
Sticking towards the theory of "Super Good quality, Satisfactory service" ,We are striving to become a superb business enterprise partner of you for Good Quality Aluminum Plate 20mm - Aluminum Round Bar 7075 T6 T651 High Corrosion Resistant – Miandi , The product will supply to all over the world, such as: Malaysia, Istanbul, Russia, Each year, many of our customers would visit our company and achieve great business advancements working with us. We sincerely welcome you to visit us at any time and together we will prevail to a greater success in the hair industry.
By Emma from United Kingdom - 2017.02.28 14:19
Staff is skilled, well-equipped, process is specification, products meet the requirements and delivery is guaranteed, a best partner!
By Sandy from Suriname - 2018.06.05 13:10