Factory Free sample 6063 Aluminum - 7075 Aluminum Round Bar T6, T6511, T73, T73511 – Miandi
Factory Free sample 6063 Aluminum - 7075 Aluminum Round Bar T6, T6511, T73, T73511 – Miandi Detail:
7075 AEROSPACE ALUMINUM BAR
7075 is an aerospace aluminum bar with cold finished or extruded aluminum wrought alloy with high strength, adequate machinability and improved stress corrosion control. Fine grain control results in good tool wear.
7075 is one of the highest strength aluminum alloys. It has good fatigue strength and average machinability. Often used where parts are highly stressed. It is not weld able and has less corrosion resistance than other aluminum alloys. The mechanical properties depend on the temper of the material. Commonly used in the bicycle industry, aircraft structures.
When forging this metal, it is recommended that the temperature be set between 700 and 900 degrees. This should then be followed by solution heat treatment. It’s not recommended for welding to be used as a joining technique, but if needed, resistance welding can be used. It’s not recommended for arc welding to be used because it can lower the metal’s corrosion resistance.
Chemical Composition WT(%) |
|||||||||
Silicon |
Iron |
Copper |
Magnesium |
Manganese |
Chromium |
Zinc |
Titanium |
Others |
Aluminum |
0.40 |
0.50 |
1.20~2.0 |
2.10~2.90 |
0.30 |
0.18~0.28 |
5.10~6.10 |
0.20 |
0.15 |
Balance |
Typical Mechanical Properties |
|||||
Temper |
Diameter (mm) |
Tensile Strength (Mpa) |
Yield Strength (Mpa) |
Elongation (%) |
Hardnedd (HB) |
T6,T651,T6511 | ≤25.00 |
≥540 |
≥480 |
≥7 |
150 |
>25.00~100.00 |
560 |
500 |
7 |
150 | |
>100.00~150.00 |
550 |
440 |
5 |
150 | |
>150.00~200.00 |
440 |
400 |
5 |
150 | |
T73,T7351,T73511 | ≤25.00 |
485 |
420 |
7 |
135 |
>25.00~75.00 |
475 |
405 |
7 |
135 | |
>75.00~100.00 |
470 |
390 |
6 |
135 | |
>100.00~150.00 |
440 |
360 |
6 |
135 |
Applications
Aircraft Structures
Bicycle Industry
Our Advantage
Inventory and Delivery
We have enough product in stock, we can offer enough material to customers. The lead time can be within 7 days for stock materil.
Quality
All the product are from the biggest manufacturer, we can offer the MTC to you. And we can also offer Third-Party test report.
Custom
We have cutting machine, custom size are available.
Product detail pictures:
Related Product Guide:
Gigging the night away, thanks to tighter regulations | A7075 Aluminum Sheet
Disabled donkey gets special cast Open Navigation Close Navigation Search Facebook Twitter YouTube RSS Feed Email | Aluminum 5086
We have the most advanced production equipment, experienced and qualified engineers and workers, recognized quality control systems and a friendly professional sales team pre/after-sales support for Factory Free sample 6063 Aluminum - 7075 Aluminum Round Bar T6, T6511, T73, T73511 – Miandi , The product will supply to all over the world, such as: Nairobi, Tajikistan, Roman, Being the top solutions of our factory, our solutions series have been tested and won us experienced authority certifications. For additional parameters and item list details, please click the button to acquire additional nformation.
By Arabela from India - 2018.07.12 12:19
The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
By Ivan from Suriname - 2018.10.31 10:02