factory customized Aluminum Alloy Sheet 6061 - 7075 Aluminum Round Bar T6, T6511, T73, T73511 – Miandi
factory customized Aluminum Alloy Sheet 6061 - 7075 Aluminum Round Bar T6, T6511, T73, T73511 – Miandi Detail:
7075 AEROSPACE ALUMINUM BAR
7075 is an aerospace aluminum bar with cold finished or extruded aluminum wrought alloy with high strength, adequate machinability and improved stress corrosion control. Fine grain control results in good tool wear.
7075 is one of the highest strength aluminum alloys. It has good fatigue strength and average machinability. Often used where parts are highly stressed. It is not weld able and has less corrosion resistance than other aluminum alloys. The mechanical properties depend on the temper of the material. Commonly used in the bicycle industry, aircraft structures.
When forging this metal, it is recommended that the temperature be set between 700 and 900 degrees. This should then be followed by solution heat treatment. It’s not recommended for welding to be used as a joining technique, but if needed, resistance welding can be used. It’s not recommended for arc welding to be used because it can lower the metal’s corrosion resistance.
|
Chemical Composition WT(%) |
|||||||||
|
Silicon |
Iron |
Copper |
Magnesium |
Manganese |
Chromium |
Zinc |
Titanium |
Others |
Aluminum |
|
0.40 |
0.50 |
1.20~2.0 |
2.10~2.90 |
0.30 |
0.18~0.28 |
5.10~6.10 |
0.20 |
0.15 |
Balance |
|
Typical Mechanical Properties |
|||||
|
Temper |
Diameter (mm) |
Tensile Strength (Mpa) |
Yield Strength (Mpa) |
Elongation (%) |
Hardnedd (HB) |
| T6,T651,T6511 | ≤25.00 |
≥540 |
≥480 |
≥7 |
150 |
| ＞25.00~100.00 |
560 |
500 |
7 |
150 | |
| ＞100.00~150.00 |
550 |
440 |
5 |
150 | |
| ＞150.00~200.00 |
440 |
400 |
5 |
150 | |
| T73,T7351,T73511 | ≤25.00 |
485 |
420 |
7 |
135 |
| ＞25.00~75.00 |
475 |
405 |
7 |
135 | |
| ＞75.00~100.00 |
470 |
390 |
6 |
135 | |
| ＞100.00~150.00 |
440 |
360 |
6 |
135 | |
Applications
Aircraft Structures
Bicycle Industry
Our Advantage
Inventory and Delivery
We have enough product in stock, we can offer enough material to customers. The lead time can be within 7 days for stock materil.
Quality
All the product are from the biggest manufacturer, we can offer the MTC to you. And we can also offer Third-Party test report.
Custom
We have cutting machine, custom size are available.
Product detail pictures:
Related Product Guide:
Modern extension ideas: 18 contemporary extension designs | 4043 Aluminum Plate
Phonon limited superconducting correlations in metallic nanograins | 4043 Aluminum Plate
We pursue the administration tenet of "Quality is exceptional, Assistance is supreme, Reputation is first", and will sincerely create and share success with all clients for factory customized Aluminum Alloy Sheet 6061 - 7075 Aluminum Round Bar T6, T6511, T73, T73511 – Miandi , The product will supply to all over the world, such as: Bogota, Qatar, Swansea, Since the establishment of our company, we have realized the importance of providing good quality products and the best before-sales and after-sales services. Most problems between global suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down those barriers to ensure you get what you want to the level you expect, when you want it.
By Belinda from Egypt - 2017.12.02 14:11
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
By Lillian from Algeria - 2017.11.01 17:04
